chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Idle Air Control Motor (IAC) <--> [Idle Speed/Throttle Actuator - Electronic] > < Fuel Tank Pressure Sensor - 1|Page 5117
Page 2
background image

1. Reinstall the new fuel tank vapor pressure sensor (7) to modular fuel sender.
2. Connect the electrical connector to fuel tank vapor pressure sensor

3. Reinstall the fuel sender access panel.
4. Reinstall the 7 nuts retaining the fuel sender access panel.

Tighten
Tighten the fuel sender access panel nuts to 10 N.m (88 lb in)

5. Reinstall the trunk liner.
6. Reinstall the spare tire, the jack, and the spare tire cover.
7. Reconnect the negative battery cable.

Idle Air Control Motor (IAC) <--> [Idle Speed/Throttle Actuator - Electronic] > < Fuel Tank Pressure Sensor - 1|Page 5117