Monte Carlo V6-3.4L VIN E (2000)
Powertrain Control Module: Service and Repair
EEPROM Programming
1. The ignition is ON.
2. If the PCM fails to program, inspect the Techline equipment for the latest software version.
3. Attempt to program the PCM. If the PCM still cannot be programmed properly, replace the PCM. The replacement PCM must be programmed.
Functional Check
1. Perform A Powertrain On Board Diagnostic (OBD) System Check.
2. Start the engine and let the engine run for one minute.
3. Use the scan tool in order to scan for the DTCs.
