Monte Carlo V6-3.4L VIN E (2000)
Fuel Filler Hose: Service and Repair
REMOVAL PROCEDURE
NOTE: Cap the fittings and plug the holes when servicing the fuel system in order to prevent dirt and other contaminants from entering the open
pipes and passages.
IMPORTANT: Always maintain cleanliness when servicing fuel system components.
1. Relieve the fuel system pressure. Refer to Fuel System Pressure Test.
2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in Vehicle Lifting.
3. Loosen the fuel filler hose clamp at the fuel tank.
4. Loosen the fuel filler hose clamp at the fuel filler pipe.
5. Remove the fuel filler hose.
6. Remove the fuel filler pipe attaching screw from the under body.
7. Remove the fuel filler pipe attaching screws from the fuel filler pipe access panel.