Monte Carlo V6-3.4L VIN E (2000)
17. Connect the module (1) to the adapter (2) on the SIR deployment harness (3).
18. Firmly seat the adapter into the module connector.
19. Clear the area of people.
CAUTION: When you are deploying an inflator module for disposal, perform the deployment procedures in the order listed. Failure to
follow the procedures in the order listed may result in personal injury.
20. Separate the two banana plugs on the SIR deployment harness.
IMPORTANT
^
The rapid gas expansion involved with deploying an air bag is very loud. Notify all the people in the immediate area that you intend to deploy
the inflator module.
^
When the air bag deploys, the SIR deployment fixture may jump vertically. This is a normal reaction of the inflator module to the force of the
rapid gas expansion inside the air bag.