Monte Carlo V6-3.4L VIN E (2000)
Inflatable Restraint Sensing and Diagnostic Module: Description and Operation
INFLATABLE RESTRAINT SENSING AND DIAGNOSTIC MODULE
The inflatable restraint Sensing and Diagnostic Module (SDM) performs the following functions in the SIR system:
^
Energy Reserve - The SDM maintains a 23 Volt Loop Reserve (23 VLR) energy supply to provide deployment energy for the air bags. Ignition
voltage can provide deployment energy if the 23 Volt Loop Reserves malfunction.
^
Crash Detection
-
Frontal - The SDM monitors vehicle velocity changes in order to detect frontal crashes that are severe enough to warrant deployment.
-
Side - The SDM monitors vehicle velocity changes along with SIS information in order to detect side impact crashes that are severe enough to
warrant deployment.
^
Air Bag Deployment
-
Frontal - During a frontal crash of sufficient force, the SDM will cause enough current to flow through the frontal inflator modules to deploy
the frontal air bags.
-
Side - During a side crash of sufficient force, the SDM will cause enough current to flow through the side impact module to deploy the driver
side air bag.
^
Frontal Crash Recording - The SDM records information regarding the SIR system status during a frontal crash.
^
Side Impact System Malfunction Monitoring - The SDM monitors the SIS. The SIS can communicate the status of the side impact air bag system
to the SDM.
^
Malfunction Detection - The SDM performs diagnostic monitoring of the SIR system electrical components. Upon detection of a circuit or
component malfunction, the SDM will set a DTC.
^
Malfunction Diagnosis - The SDM displays SIR DTCs and system status information through the use of a scan tool.
^
Driver Notification - The SDM notifies the vehicle driver of SIR system malfunctions by controlling the AIR BAG warning lamp in the instrument
cluster via Class 2 serial data.
The SDM connects to the SIR wiring harness using the following connector(s):
^
The 18-way connector provides power, ground, and all the required interfaces for frontal air bag deployment.
^
The 8-way connector (AJ7) provides all the required interfaces for side impact sensing and side air bag deployment.
The SDM receives power whenever the ignition is ON.