Monte Carlo V6-3.4L VIN E (2000)
1. Install the seat belt anchor to the vehicle
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the anchor bolt to the seat belt buckle.
Tighten
Tighten the anchor bolt to 42 N.m (31 lb ft).
3. Return the carpet to the original position.
4. Install the seat belt retractor to the rear quarter inner panel.
5. Install the bolt to the seat belt retractor.
Tighten
Tighten the seat belt retractor bolt to 42 N.m (31 lb ft).
