Monte Carlo V6-3.4L VIN E (2000)
Tie Rod Boot: Service and Repair
Removal Procedure
Tools Required
-
J 22610 Service Boot Clamp Installer
1. Raise and support the vehicle. Refer to Vehicle Lifting
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment
3. Remove the outer tie rod from the inner tie rod assembly. Refer to Tie Rod End Replacement - Outer.
4. Remove the inner tie rod jam nut (2) from the inner tie rod assembly (1).
5. Remove the clamp (2) from the end of the inner tie rod boot (1).