Monte Carlo V6-3.4L VIN E (2000)
4. Align the front frame insulator to the front frame opening with the front frame alignment tabs facing to the front.
5. Using J 45296 , install the front frame insulator to the front frame.
6. Install the frame front upper insulators.
7. Raise the front of the frame.
Notice: Refer to Fastener Notice in Cautions and Notices.
8. Install the front frame bolts and retainers.
Tighten the front frame bolts to 180 Nm (133 lb ft).
9. Remove the jackstand.
10. Connect the fog lamp electrical connectors to the fog lamps.
11. Connect the steering intermediate shaft. Refer to Intermediate Steering Shaft Replacement in Steering Wheel and Column.
12. Lower the vehicle.