Monte Carlo V6-3.4L VIN E (2000)
Wheel Bearing: Service and Repair
Front Wheel Drive Shaft Bearing Replacement
Front Wheel Drive Shaft Bearing Replacement
Removal Procedure
Tools Required
^
J 28733-B Spindle Remover
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
3. Disconnect the wheel speed sensor electrical connector (2).
4. Remove the wheel speed sensor electrical connector from the bracket.
5. Remove the brake caliper bracket with the brake caliper. Refer to Brake Caliper Bracket Replacement (Front) or Brake Caliper Bracket
Replacement (Rear) in Brakes and Traction Control.
6. Remove the brake rotor. Refer to Brake Rotor Replacement (Front) or Brake Rotor Replacement (Rear) in Brakes and Traction Control.
7. Remove the wheel drive shaft nut. Refer to Wheel Drive Shaft Replacement in Wheel Drive Shafts.