Monte Carlo V6-3.4L VIN E (2000)
Shift Interlock Solenoid: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Starting and Charging.
2. Remove the center console. Refer to Console Replacement - Front Floor (Impala) or Console Replacement - Front Floor (Monte Carlo) in
Instrument Panel, Gauges and Warning Indicators.
3. Disconnect electrical connector from the A/T shift lock control (2).
4. Remove both ends of the Automatic Transmission Shift Lock Control from pivot points (1).
Installation Procedure
1. Install the A/T shift lock control upper clip onto upper pivot point, and lower clip onto the lower pivot point.