Monte Carlo V6-3.4L VIN E (2000)
3. Remove the automatic transaxle range selector cable from the shift control lever.
4. Remove the automatic transaxle range selector cable from the manual shaft. Refer to Automatic Transmission Range Selector Cable Replacement
(New Cable Installation Only) or Automatic Transmission Range Selector Cable Replacement (At Manual Shaft) or Automatic Transmission
Range Selector Cable Replacement (At Console Shift Control) or Automatic Transmission Range Selector Cable Replacement (At Column Shift
Control).
5. Remove the automatic transaxle range selector cable through the hole in the dash.
Installation Procedure
Caution: Refer to Automatic Transaxle Range Selector Cable Caution in Service Precautions.
1. Install the automatic transaxle range selector cable through the hole in the dash.
