Monte Carlo V6-3.4L VIN E (2000)
Shifter A/T: Service and Repair
Automatic Transmission Range Selector Cable Lever Replacement
Removal Procedure
1. Remove the throttle body air inlet duct. Refer to Powertrain Management.
2. Remove the automatic transaxle range selector lever cable from the automatic transaxle range selector lever
3. Remove the automatic transaxle range selector lever retaining nut.
4. Remove the automatic transaxle range selector lever from the automatic transaxle.
Installation Procedure
1. Install the automatic transaxle range selector lever to the automatic transaxle.