Monte Carlo V6-3.5L VIN K Flex Fuel (2006)
13. Remove the LF door trim panel (2).
14. Remove the CPA (3) from the SIS - left connector (4).
15. Remove the SIS - left connector (4) from the SIS (2).
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. To enable the SIS - left, go to step 3. To enable the seat belt retractor pretensioner - LF, go to step 5.
3. Install the SIS - left connector (4) to the SIS (2).
4. Install the CPA (3) to the SIS - left connector (4).
5. Install the LF door trim panel (2).
