Monte Carlo V6-3.8L SC VIN 1 (2004)
1. Route the antenna extension cable. Secure the cable.
2. Connect the antenna extension cable to the radio. Install the radio.
IMPORTANT: The antenna cable uses a sliding snap-lock. Holding the sliding lock feature will prevent installation.
3. Connect the antenna extension cable from the radio to the antenna cable near the kick panel:
3.1.
Position the antenna extension cable behind the sliding lock feature.
3.2.
Install the antenna extension cable to the sliding lock feature.
4. Install the left instrument panel insulator.
5. Install the carpet.
6. Install the left carpet retainer.