Monte Carlo V6-3.8L SC VIN 1 (2004)
Steering Mounted Controls Transmitter: Service and Repair
Steering Wheel Control Switch Assembly Replacement (Monte Carlo)
Removal Procedure
1. Disable the SIR system.
2. Remove the inflatable restraint steering wheel module.
3. Remove the steering wheel.
4. Remove the wire harness from the retainers in the steering wheel aluminum insert and plastic back shroud.
5. Remove the switch bezel screw at the steering wheel insert.
6. Pull upward in order to remove the switch bezel from the steering wheel.
7. Disconnect the electrical connectors from the back of the switches.
