Monte Carlo V6-3.8L SC VIN 1 (2004)
1. Install the front bumper fascia reinforcement outer to the front bumper fascia.
2. Install the front bumper fascia reinforcement outer push-in retainers.
3. Install the front bumper fascia.
Fascia Replacement - Front Bumper (Monte Carlo)
Fascia Replacement - Front Bumper (Monte Carlo)
Tools Required
J 38778 Door Trim Pad Clip Remover
Removal Procedure
1. Remove the front fender liners.
2. Remove the headlamps.
3. Remove the fog lamps, if equipped.
4. Remove the nuts from the front bumper fascia at the fender.
5. Remove the push-in retainers from the upper front bumper fascia support using J 38778.