Monte Carlo V6-3.8L SC VIN 1 (2004)
6. Remove the screws from the front bumper fascia at the lower support.
7. Remove the front bumper fascia from the vehicle.
8. Remove the front bumper fascia reinforcement.
Installation Procedure
1. Install the front bumper fascia reinforcement.
2. Install the fascia to the vehicle.
3. Install the push-in retainers to the front upper bumper fascia support.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the front bumper fascia to lower support screws.
Tighten the front bumper fascia lower support screws to 2 N.m (18 lb in).