Monte Carlo V6-3.8L SC VIN 1 (2004)
5. Install the front bumper fascia to fender nuts.
Tighten the front bumper fascia nuts to 6 N.m (53 lb in).
6. Install the front fender liners.
7. Install the fog lamps, if equipped.
8. Install the headlamps.
Fascia Support Bracket Replacement - Front Upper
Fascia Support Bracket Replacement - Front Upper
Removal Procedure
1. Open the hood.
2. Remove the upper radiator air baffle.
3. Remove the bolts from the center support bracket at the front bumper fascia.
4. Remove the center support bracket from the hood latch center support.
Installation Procedure
1. Align the center support bracket to the hood latch center support and to the upper support.
2. Install the bolts to the hood latch center support and hand tighten.
Notice: Refer to Fastener Notice in Service Precautions.