Monte Carlo V6-3.8L SC VIN 1 (2004)
5. Remove the front bolt from the front bumper fascia upper support to the hood latch support bracket.
6. Remove the front bumper fascia upper support from the front bumper fascia.
Installation Procedure
1. Install the front bumper fascia upper support to the front bumper fascia.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the front bumper fascia upper support bolts.
Tighten the front bumper fascia upper support bolts to 10 N.m (89 lb in).
3. Install the front bolt to the front bumper fascia upper support to the hood latch support bracket.
4. Install the center support bracket bolt.
Tighten the hood latch support bracket bolts to 10 N.m (89 lb in).
