Monte Carlo V6-3.8L SC VIN 1 (2004)
Rear Bumper Cover / Fascia: Service and Repair
Fascia Extension Replacement - Rear
Fascia Extension Replacement - Rear
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the rear tires and wheels.
3. Drill out the plastic rivet from the rear fascia extension corner to the splash shield.
4. Remove the rear bumper fascia extension screw from the rear fascia extension corner to the splash shield.
5. Remove the rear bumper fascia extension lower screw from the lower rear fascia to splash shield.
6. Drill out the rivets from the lower rear end of the rear fascia extension.
