Monte Carlo V6-3.8L SC VIN 1 (2004)
Front Door Interior Handle: Service and Repair
Door Handle Replacement
Door Handle Replacement - Front Inside (Monte Carlo)
Removal Procedure
1. Remove the front door trim panel.
2. Remove the front door water deflector from the front inside door handle.
3. Drill out the rivet (2) from the front inside door handle (1) using a 6.35 mm (1/4 in) drill bit.
4. Remove the lock rod and door handle rod from the front inside door handle.
5. Remove the front inside door handle from the front door inner panel.
Installation Procedure
1. Install the front inside door handle by inserting the tabs into the front door inner panel slots.
2. Install the lock rod and the door handle rod to the front inside door handle.