Monte Carlo V6-3.8L SC VIN 1 (2004)
Front Door Latch: Service and Repair
Lock Replacement - Front Door (Monte Carlo)
Removal Procedure
1. Position the window completely up.
2. Remove the front door trim panel.
3. Remove the front door water deflector.
4. Remove the inner energy absorber.
5. Remove the front door inside handle rods from the front door inside handle.
6. Remove the window channel retainer screw.
7. Remove the window channel from the door.
8. Remove the clip securing the inside handle rods to the door.
9. Remove the outside handle rod-to-lock clip from the lock.
10. Remove the screws (1, 2, 3) securing the lock to the front door.
11. Remove the front door lock from the front door with the inside door handle rods attached to the lock.
12. Disconnect the electrical connectors.
13. Remove the front door inside door handle rods from the front door lock.
Installation Procedure
1. Install the front door inside handle rods to the lock.
