Monte Carlo V6-3.8L SC VIN 1 (2004)
Front Door Panel: Service and Repair
Bezel Replacement
Handle Bezel Replacement - Inside
HANDLE BEZEL REPLACEMENT - INSIDE (MONTE CARLO)
REMOVAL PROCEDURE
1. Remove the inside door handle bezel screw.
2. Pull the front end of the bezel (rounded end) away from the trim pad.
3. Slide the bezel forward to release the rear clips.
4. Remove the inside door handle bezel from the front door trim panel.
5. Remove the front door lock switch from the inside door handle bezel.
6. Remove the inside door handle bezel from the vehicle.
INSTALLATION PROCEDURE
1. Install the front door lock switch to the inside door handle bezel.
2. Install the inside door handle bezel to the front door trim panel.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the screw to the inside door handle bezel.
Tighten
Tighten the screw to 2 N.m (18 lb in).
Handle Bezel Replacement - Inside (Monte Carlo)