Monte Carlo V6-3.8L SC VIN 1 (2004)
Fuel Door: Service and Repair
Fuel Filler Pocket Replacement (Monte Carlo)
Fuel Filler Pocket Replacement (Monte Carlo)
Removal Procedure
1. Open the fuel filler door.
2. Remove the fuel filler cap.
3. Remove the bolts from the fuel filler pocket at the fuel filler neck.
4. Apply tape to the opening around the fuel filler pocket.
5. Remove the fuel filler pocket using a small flat-bladed tool, pressing down and out from the top edge of the fuel filler pocket.
Installation Procedure
1. Install the fuel filler pocket to the fuel filler neck by pressing it into place until fully seated.
