Monte Carlo V6-3.8L SC VIN 1 (2004)
Hood Insulator / Pad: Service and Repair
Hood Insulator Replacement
Tools Required
J 38778Door Trim Pad Clip Remover
Removal Procedure
1. Open the hood.
2. Use J 38778 to remove the hood insulator push-in retainers.
3. Remove the hood insulator from the hood.
Installation Procedure
1. Install the hood insulator to the hood support brackets.
2. Align the hood insulator retainers holes to the holes in the hood.
3. Install the push-in retainers to the hood.
4. Close the hood.