Monte Carlo V6-3.8L SC VIN 1 (2004)
Power Door Lock Actuator: Procedures
Lock Actuator Replacement - Front Door
LOCK ACTUATOR REPLACEMENT - FRONT DOOR
REMOVAL PROCEDURE
1. Remove the front door lock.
2. Remove the front door lock to front door lock actuator screws.
3. Remove the front door actuator from the front door lock.
INSTALLATION PROCEDURE
1. Align the front door actuator to the front door lock.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the front door lock to front door actuator screws.
Tighten
Tighten the front door actuator screws to 2 N.m (18 lb in).
3. Install the front door lock.
Lock Actuator Replacement - Rear Door
LOCK ACTUATOR REPLACEMENT - REAR DOOR
