Monte Carlo V6-3.8L SC VIN 1 (2004)
7. Remove the electrical harness from the power seat motor harness.
8. Remove the electrical harness clip and disconnect the harness retainer from the adjuster bracket.
9. Recline the seat back to the full reclined position.
10. Remove the trim cover J-hooks from the seat front and from the seat sides.
11. Fold back the seat trim and the pad to access the adjuster bolts.
12. Remove the 4 adjuster bolts.
13. Remove the seat adjuster.
Installation Procedure
1. Position the adjuster on the seat frame.
Notice: Refer to Fastener Notice in Service Precautions.
