Monte Carlo V6-3.8L SC VIN 1 (2004)
2. Install the adjuster bolts.
Tighten the bolts to 24 N.m (18 lb ft).
3. Return the seat pad and the trim to the installed position.
4. Install the trim cover J-hooks.
5. Install the electrical harness clip and the retainer on the adjuster bracket.
6. Connect the electrical harness to the seat motor harness.
7. Install the seat belt buckle.
8. Install the seat belt bracket (2).
9. Install the seat trim panel.
Important: Inspect the drive cables. Make sure they are straight between the motors and the adjuster.
10. Install the front seat.