Monte Carlo V6-3.8L SC VIN 1 (2004)
3. For split bench, install the bolts to the front seat frame to the front seat track adjusters.
Tighten
Tighten the bolts to the front seat frame to 25 N.m (18 lb ft).
4. Install the front seat recliner assembly to the front seat cushion frame.
5. Install the front seat cushion to the front seat cushion frame.
6. Install the front seat cushion cover to the front seat cushion.
7. Install the front seat back to the front seat.
8. Install the front seat to the vehicle.
Seat Cushion Replacement - Rear
SEAT CUSHION REPLACEMENT - REAR
REMOVAL PROCEDURE
Remove the rear seat cushion by lifting up and pulling out of the retainer. If the retainer comes out with the cushion, remove the retainer and press the
retainer back into the floor pan.
INSTALLATION PROCEDURE
