Monte Carlo V6-3.8L SC VIN 1 (2004)
5. Fasten the hook and the loop retainers securing the seat cushion cover to the cushion, by pressing in place until fully seated.
6. Push the seat trim and cushion under the seat back.
7. Fasten the J-hook retainers on all sides of the front seat cushion cover.
8. Connect the electrical connector for the heated seat, if equipped.
9. Install the front seat outer trim bracket.
10. Install the front seat trim panel.
11. Install the front seat to the vehicle.
Seat Cushion Cover Replacement - Front (Split Bench)
Seat Cushion Cover Replacement - Front (Split Bench)
Removal Procedure
1. Remove the front seat from the vehicle.
2. Remove the front seat armrest from the front seat.
3. Remove the front seat back.
