Monte Carlo V6-3.8L SC VIN 1 (2004)
3. Install the front seat cushion cover onto the front seat cushion.
4. Install the hog rings to the rear of the front seat cushion cover.
5. Fasten the J-hook retainers on all sides of the front seat cushion cover.
6. Fasten the retainers to the front seat frame on the bottom of the front seat cushion.
7. Fasten the retainer to the front seat frame at the seat belt.
8. Fasten the hook and the loop retainers securing the front seat cushion cover to the cushion, by pressing in place until fully seated.