Monte Carlo V6-3.8L SC VIN 1 (2004)
1. Install the thermostat.
2. Install the gasket and the water outlet housing.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the water outlet housing bolt and the stud.
-
Tighten the bolt and the stud to 27 Nm (20 ft. lbs.).
4. Install the radiator inlet hose to the water outlet housing.
5. Use the J 38185 to reposition install the hose clamp to the water outlet housing.
6. Fill the cooling system.
7. Install the fuel injector sight shield.
