Monte Carlo V6-3.8L SC VIN 1 (2004)
Water Pump: Service and Repair
Water Pump Replacement (3.8L)
Removal Procedure
1. Drain the cooling system.
2. Loosen the water pump pulley bolts.
3. Remove the drive belt.
4. Remove the water pump pulley bolts.
5. Remove the water pump pulley.
6. Remove the power steering pump and reposition.
7. Remove the water pump bolts.
8. Remove the water pump.
9. Remove the water pump gasket.
10. Clean and inspect the water pump mating surfaces.
Installation Procedure