Monte Carlo V6-3.8L SC VIN 1 (2004)
1. Install the water pump gasket.
2. Install the water pump.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the water pump bolts.
-
Tighten the long water pump bolts to 34 Nm (25 ft. lbs.).
-
Tighten the short water pump bolts to 22 Nm (16 ft. lbs.).
4. Install the water pump pulley.
5. Install the water pump pulley bolts.
-
Tighten the bolts to 13 Nm (115 inch lbs.).
6. Install the power steering pump.
7. Install the drive belt.
8. Fill the cooling system.
