Monte Carlo V6-3.8L SC VIN 1 (2004)
5. Install the fuel injector sight shield bracket to the exhaust manifold studs.
6. Install the fuel injector sight shield bracket nuts.
-
Tighten the nuts to 30 Nm (22 ft. lbs.).
7. Install the right side engine lift bracket.
8. Install the right side engine lift bracket bolt and the nut.
-
Tighten the bolt and the nut to 30 Nm (22 ft. lbs.).
9. Install the right side spark plug wires to the spark plugs.
10. Install the drive belt tensioner.
11. Install the fuel injector sight shield.
12. Connect the negative battery cable.
13. Check and fill crankcase as necessary
14. Inspect for oil leaks.
