Monte Carlo V6-3.8L SC VIN 1 (2004)
5. Loosely install the left engine mount bracket bolts to the engine.
-
Tighten the left and the right engine mount bracket bolts to 102 Nm (75 ft. lbs.).
6. Using the jackstands raise the frame to the original position.
7. Install the right side frame bolts.
-
Tighten the right and the left side frame bolts to 180 Nm (133 ft. lbs.).
8. Lower the vehicle.
9. Use the engine support fixture to lower the engine.
10. Raise the vehicle.
11. Install the engine mount lower nuts to the frame.
-
Tighten the engine mount lower nuts to 43 Nm (32 ft. lbs.).
12. Install the catalytic converter to the right exhaust manifold.
13. Install the right exhaust manifold pipe stud nuts
-
Tighten the right exhaust manifold pipe stud nuts to 30 Nm (22 ft. lbs.).
