Monte Carlo V6-3.8L SC VIN 1 (2004)
Engine Mount: Service and Repair
Engine Mount Strut Bracket Replacement - Right
Upper
Engine Mount Strut Bracket Replacement - Right Upper
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the fuel injector sight shield.
3. Remove the right engine mount strut at the upper engine mount strut bracket.
4. Remove the lower engine mount strut bracket nut.
5. Remove the lower engine mount strut bracket bolts and the lower engine mount strut bracket.
6. Remove the evaporative emission (EVAP) canister purge valve.
7. Relieve the fuel pressure.
8. Remove the fuel rail assembly.
