Monte Carlo V6-3.8L SC VIN 1 (2004)
8. Lower the vehicle.
9. Use the engine support fixture to lower the engine.
10. Raise the vehicle.
11. Install the engine mount lower nuts to the frame.
-
Tighten the engine mount lower nuts to 43 Nm (32 ft. lbs.).
12. Install the catalytic converter to the right exhaust manifold.
13. Install the right exhaust manifold pipe stud nuts
-
Tighten the right exhaust manifold pipe stud nuts to 30 Nm (22 ft. lbs.).
14. Install the A/C compressor bracket and the A/C compressor bracket bolts.
-
Tighten the A/C compressor bracket bolts to 50 Nm (37 ft. lbs.).
15. Install the A/C compressor and the A/C compressor nuts.
-
Tighten the A/C compressor nuts to 30 Nm (22 ft. lbs.).
16. Install the power steering oil cooler pipe brackets to the frame.
