Monte Carlo V6-3.8L SC VIN 1 (2004)
1. Install the upper engine mount strut bracket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the upper engine mount strut bracket bolts.
-
Tighten the upper engine mount strut bracket bolts to 50 Nm (37 ft. lbs.).
3. Install the fuel rail assembly.
4. Install the evaporative emission (EVAP) canister purge valve.
5. Install the lower engine mount strut bracket bolts.
-
Tighten the lower engine mount strut bracket bolts to 50 Nm (37 ft. lbs.).
6. Install the lower engine mount strut bracket nut.
-
Tighten the lower engine mount strut bracket nut to 30 Nm (22 ft. lbs.).