Monte Carlo V6-3.8L SC VIN 1 (2004)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator and Tube Replacement
Removal Procedure
1. Remove the oil level indicator.
2. Remove the oil level indicator tube bracket nut.
3. Remove the oil level indicator tube.
Installation Procedure
1. Make sure that the O-ring is in place and install the oil indicator tube to the engine.
2. Install the oil indicator tube bracket to the exhaust manifold stud.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the oil level indicator tube bracket nut.
-
Tighten the nut to 19 Nm (14 ft. lbs.).
4. Install the oil level indicator.
5. Check and fill the engine oil as necessary.
