Monte Carlo V6-3.8L SC VIN 1 (2004)
2. Hook one of the open ends of the retaining ring in one of the slots in the quick connector.
3. Rotate the retaining ring around the connector until the retaining ring is positioned with all 3 ears through the 3 slots.
4. Ensure the 3 retaining ring ears can be seen from the inside of the connector and the retaining ring can move freely in the slots.
5. Install the engine oil cooler line into the quick connector fitting.
Pull back on the engine oil cooler lines to ensure a proper connection.
6. Inspect and fill the engine oil to the proper level.
