Monte Carlo V6-3.8L SC VIN 1 (2004)
2. Install the upper-to-lower intake manifold carrier gasket to the upper intake manifold.
3. Carefully place the upper intake manifold onto the lower intake manifold. Ensure that the alignment pins in the upper intake manifold align with
the holes in the lower intake manifold.
4. Install the upper intake manifold.
5. Apply thread lock compound GM P/N 12345382, (Canadian P/N 10953489) or equivalent, to the bolt threads before assembly.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the upper intake manifold bolts (1-10).
Tighten
Tighten the upper intake manifold bolts in sequence to 10 Nm (89 lb in).
7. Install the accelerator and the cruise control cables with the bracket to the throttle body.
8. Install the EVAP purge solenoid vacuum line to the throttle body.
