Monte Carlo V6-3.8L SC VIN 1 (2004)
14. Remove the crankshaft position sensor shield.
15. Remove the radiator outlet hose from the water pump.
16. Lower the vehicle.
17. Install the engine support fixture.
18. Raise the vehicle.
Important: The oil pan can be dropped slightly for engine front cover clearance if all pan bolts are loosened and the oil level sensor is removed.
19. Remove the oil filter.
20. Remove the engine mount bracket for oil pan access.
21. Disconnect the oil level sensor electrical connector.
22. Remove the oil level sensor.
23. Remove the oil pan-to-engine front cover bolts.
24. Loosen the remaining oil pan bolts to gain access for the engine front cover removal. DO NOT remove the remaining oil pan bolts.
25. Remove the crankshaft position sensor.
