Monte Carlo V6-3.8L SC VIN 1 (2004)
11. Install the engine front cover bolts (1-7).
-
Tighten the bolts to 20 Nm (15 ft. lbs.) + 40 degrees.
12. Install the crankshaft position sensor.
13. Install the crankshaft position sensor studs.
-
Tighten the studs to 30 Nm (22 ft. lbs.).
14. Install the oil pan-to-engine front cover bolts.
-
Tighten the oil pan bolts to 14 Nm (125 inch lbs.).
15. Install the oil level sensor.
-
Tighten the sensor to 20 Nm (15 ft. lbs.).
16. Connect the oil level sensor electrical connector.
17. Install the engine mount bracket.
18. Install the water pump pulley and bolts.
-
Tighten the bolts to 13 Nm (116 inch lbs.).
19. Install the radiator outlet hose to the water pump.
20. Install the oil filter. Install the engine oil pan drain plug.
