Monte Carlo V6-3.8L SC VIN 1 (2004)
3. Install the left exhaust manifold heat shield to the exhaust manifold.
4. Install the exhaust manifold heat shield nuts.
^
Tighten the nuts to 20 Nm (15 ft. lbs.).
5. Install the left engine lift bracket.
6. Install the engine lift bracket nut and the bolt.
^
Tighten the nut and the bolt to 30 Nm (22 ft. lbs.).
7. Install the oil level indicator tube.
8. Install the spark plug wires to the left side spark plugs.
9. Install the exhaust crossover to the left exhaust manifold.
10. Install the lower right engine mount strut bracket.
11. Install the right and the left engine mount struts.
12. Install the fuel injector sight shield.
