Monte Carlo V6-3.8L SC VIN 1 (2004)
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the right air distribution duct bolts.
Tighten
Tighten the bolts to 10 N.m (89 lb in).
3. Install the right I/P fuse junction block.
4. Install the air distribution duct to the cross vehicle beam.
5. Install the air distribution duct screw (1).
Tighten
Tighten the screw (1) to 1.5 N.m (13 lb in).
6. Install the air distribution duct bolts.
Tighten
Tighten the bolts to 10 N.m (89 lb in).
7. Install the I/P lower trim panel.