Monte Carlo V6-3.8L SC VIN 1 (2004)
4. Install new O-ring seals onto the receiver dehydrator tube.
5. Install the receiver dehydrator tube to the condenser.
6. Install the A/C line coupling to the receiver dehydrator tube and the condenser tube.
7. Install the A/C compressor hose to the condenser.
Install the A/C compressor hose block fitting nut to the condenser.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
8. Install the radiator.
9. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
10. Leak test the fittings of the component using J 39400-A.
