Monte Carlo V6-3.8L SC VIN 1 (2004)
1. Lubricate the O-ring seal with Dex-Cool antifreeze.
2. Install the heater pipe adapter.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the heater outlet pipe adapter mounting bolt.
Tighten
Tighten the bolt to 6 N.m (53 lb in).
4. Install the heater outlet hose to the pipe adapter.
5. Use J 38185 in order to secure the heater core hose clamp.
6. Install the fuel injector sight shield.
7. Refill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
