Monte Carlo V6-3.8L SC VIN 1 (2004)
Driver/Vehicle Information Display: Procedures
Driver Info Center Replacement (With RPO Code UG1, Except CF5)
DRIVER INFORMATION CENTER REPLACEMENT (UG1, EXC CF5)
REMOVAL PROCEDURE
IMPORTANT: The driver information center is serviced as part of the complete roof console.
1. Remove the roof console screw.
2. Use a small, flat-bladed tool in order to release the 2 retainers. These retainers are located on each side of the assembly in front of the switches.
Press the retainers outward to release the roof console.
