Monte Carlo V6-3.8L SC VIN 1 (2004)
Radiator Hose: Service and Repair
Inlet
Radiator Hose Replacement - Inlet (3.8L)
-
Tools Required
-
J 38185 Hose Clamp Pliers
Removal Procedure
1. Partially drain the cooling system.
2. Remove the left diagonal brace.
3. Use the J 38185 in order to reposition the hose clamp from the radiator.
4. Remove the radiator inlet hose from the radiator.
5. Use the J 38185 in order to reposition the hose clamp from the water outlet housing.
6. Remove the radiator inlet hose from the water outlet housing and the vehicle.
Installation Procedure
